POWER COMMANDER V

• Fuel and timing control
• Rev Xtend increases Rev limit
• The Power Commander V can read the exact engine temp through the bike's own ECM which allows the tuner to choose how much fuel to add during cold starts
• Cold starting on heavily modified engines should now be much more controllable and easy to adjust
• Software displays J1850 data from bike's stock ECU
• Reduced size from the PCIII USB
• Easy to install
• USB powered from computer; 9 volt adapter is no longer needed
• Two position map switching function built in (switch not included)
• Can add any SPST switch and toggle between two different fuel/timing maps
• Gear/speed input allows for map adjustment based on gear
• Analog input allows user to install any 0-5 volt sensor
• Build an adjustment table based on analog input such as boost or temperature
• Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
• Ten throttle position columns
• World's largest dyno tested map database
• Enhanced "accel pump" utility
• Made in the U.S.A.

PART#         DESCRIPTION
1020-0839   PC-V HAR XL 883 07-09
1020-0840   PC-V HAR XL 1200 07-09
1020-0842   PC-V HAR SOFTAIL 07-11
1020-0843   PC-V HAR DYNA 06-11
1020-0844   PC-V HAR V-ROD 08-11